Paxar 9402 Reference Manual page 176

106
107
108
109
200
201
202
203
204
205
206
207
208
209
210
8-10 Diagnostics and Errors
Print multiple is outside the range 1 to 999.
Cut multiple is outside the range 0 to 999. Only valid
for printers with a knife.
Multiple part supply is outside the range 1 to 5.
Cut type is outside the range 0 to 4.
Option number must be 1, 2, 3, 4, 5, 20, 30, 31, 42, 50,
51, 52, 60, or 61.
Copy length is outside the range 0 to 2710 or 0 to 100
depending on your printer.
Copy start position must be 1 to 2710 or 1 to 100
depending on your printer.
Destination start position must be 1 to 2710 or 1 to 100
depending on your printer.
Source field must be 0 to 999 or 0 to 99 depending on
your printer.
Copy type must be 1 (copy after rules) or 2 (copy
before rules).
Increment/Decrement selection must be I (increment) or
D (decrement).
Incrementing start position must be 0 to 2710 or 0 to
100 depending on your printer.
Incrementing end position must be 0 to 2710 or 0 to 100
depending on your printer.
The incrementing amount must be 0 to 999.
Security value for a PDF417 bar code must be 0 to 8.
Correct the value and resend the format to the printer.