Paxar 9402 Reference Manual page 26

This is the syntax to use when you create online configuration
packets:
Syntax
{
I,
1 to 8 optional packets
A, parameter 1...parameter 5 p
B, parameter 1...parameter 5 p
C, parameter 1...parameter 5 p
D, parameter 1...parameter 3 p
E, parameter 1...parameter 9 p
F, parameter 1...parameter 5 p
G, parameter 1...parameter 4 p
M, parameter 1...parameter 4 p
}
Syntax for single packet
{
I,
A, parameter 1...parameter 5
}
You can also add a configuration to non-volatile RAM or specify
units for supply, print, margin, and cut positions. If you use the
optional parameters with the I packet, any online configuration
packets following the split vertical bar ( p ) must specify distances
using the selected units. However, the test labels display the
units in dots, even if you entered them in English or Metrics units.
Syntax
1. header
2. ID#
2-6 Configuring the Printer
Include the I parameter with each packet if
you are sending them individually. Include it
only at the beginning of a data stream if you
are sending multiple packets.
{header,ID#,action,device p }
Constant I .
ID. Use 0.
Start of Header
Configuration Header
System Setup
Supply Setup
Print Control
Monetary Formatting
Control Characters
Communication Settings
Backfeed Control
Memory Configuration
End of Header
Start of Header
Configuration Packet Identifier
System Setup
End of Header