266
Character string length in the control characters packet
must be 5 (MPCL control characters) or 7 (ENQ/IMD
command character).
267
Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600), 4 (19200), 5 (38400), 6 (57600), or 7
(115200). Resend the communication settings packet.
268
Word length selection must be 0 (7 bits), or 1 (8 bits).
Resend the communication settings packet.
269
Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet.
270
Parity selection must be 0 (none), 1 (odd), or 2 (even).
Resend the communication settings packet.
271
Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet.
272
Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5
(1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8
(1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11
(1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2),
14 (855- Russian), 15 (857- IBM Turkish), 16 (860- DOS
Portuguese), 17 (Wingdings), 18 (Macintosh), 19
(UNICODE), 20 (BIG5), 21 (GB), 22 (SJIS to SJIS), 23
(GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).
273
Cut adjustment must be -300 to 300 dots.
282
RS232 Trailer string is too long. Use a maximum of 3
characters.
283
ENQ Trailer string is too long. Use a maximum of 3
characters.
284
The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
Diagnostics and Errors 8-13