Paxar 9402 Reference Manual page 181

327 Amount of row adjustment must be 0 to 999 (0 to 99
depending on your printer) dots in duplicate fields for
graphics.
328 Duplicate count must be 0 to 999 (0 to 99 depending on
your printer).
340 Bitmap line encoding must be H (hex) or R (run length).
350 Font selector must be 1 to 9999.
351 Font data length must be 68 to 16384.
352 Insufficient font memory is available for the downloaded
font.
380 Job request is outside the range 0 to 4.
400 The character immediately following { is invalid.
402 Field separator is not in the expected location.
403 Field separator was not found.
404 The number or string that is currently being processed
is too long.
405 Too many fields exist in the format. You cannot have
more than 1000 (or 100 depending on your printer)
fields in the format. Lines, boxes, and constant text
fields count as fields.
409 The printer memory is full. Delete unnecessary formats
or graphics from memory. If you are using a graphic file
that is very large, consider using another mapping
method (such as run length encoding) to reduce the
required memory. You may need to format flash
memory. Refer to your Operator's Handbook for more
information.
Diagnostics and Errors 8-15