Paxar 9402 Reference Manual page 180

285
286
287
288
289
290
291
292
293
310
311
314
325
8-14 Diagnostics and Errors
The storage device type in the memory configuration
packet must be N (non-volatile RAM) or R (volatile
RAM).
The buffer size is invalid.
The printhead width must be 0.
The battery voltage must be 0 (15-volt battery) or 1
(12-volt battery).
The printer address specified in the communication
settings packet must use exactly six characters.
Action must be 0 (disable), 1 (enable), or 2 (extended)
for the backfeed control packet or the printer is active.
Dispense position must be 50 to 200 dots or the printer
is active.
Backfeed distance must be 10 to 200 dots or the printer
is active. The backfeed distance can not be greater
than the dispense position.
The skip index selection defined in the field must be 0
(disabled) or 1 (enabled). Correct the packet and
resend to the printer.
Check digit scheme number must be 1 to 10.
Modulus must be 2 to 11.
Check digit algorithm must be D (sum of digits) or P
(sum of products).
Duplicating direction must be 0 (insert after) or 1 (insert
before) in duplicate fields for graphics.