Printer Configuration Information; Status Polling Information - Paxar 9402 Reference Manual

Also, keep in mind the following:
N
The Printer Applicators are released for 110-volt sales only.
N
You can use thermal direct printing (no ribbon) or thermal
transfer printing (with ribbon).
N
The Printer Applicators do not support continuous
(non-indexed) supplies.
P r i n t e r C o n f i g u r a t i o n I n f o r m a t i o n
The default configuration packet settings are:
{I,A,0,0,0,0,0 p
B,3,1,1,0,0 p
C,0,0,0,0,0,0 p
D,1,0,2 p
E,{,,,",
F,1,1,0,0,3 p
G,1,95,95 p }
S t a t u s P o l l i n g I n f o r m a t i o n
ENQ Response
??
A@
C@
CH
SB
SD
E-4 Printer Differences
The supply type must be center aperture (3).
Backfeed must be enabled (1). The dispense
position when and backfeed distances must be set to
95 dots using 1/8-inch gap supplies.
p ~,--,--,Od/Oa p
Powerup
Online/Ready to receive data after label
has been applied
Label is printing
Label is printed
Out of supplies
Out of ribbon
Meaning