Volvo Penta AQUAMATIC 280 Workshop Manual page 81

Repair instructions
3. Press out the sealing rings and the needle bearing.
Use special tools 884259 and 9991801.
NOTE! There is a sealing ring on each side of the
needle bearing.
4. Press out the bushing. Use special tools 884259
and 9991801.
78
9991801
884259
9991801
884259
5. Should the shift yoke be in need of being replaced,
remove the cotter pin (1). Then pull out the shaft (2)
and remove the shift yoke (3).
6. Remove the bearing race of the axial bearing. Use
special tools 884140 and 884143. Also replace the
O-rings (1). One in each end of the oil tube.