Volvo Penta AQUAMATIC 280 Workshop Manual page 36

13. Press out the bearings of the bearing sleeves.
Use special tools 884386 and 884265.
Input gear (Double bearing box)
14. Remove the Allen-head screw (1) and the collar
washer (2) in the center of the universal joint shaft.
Pull out the universal joint and push out the double
bearing box (3) from the clamping ring (4). Use a
rubber mallet if necessary.
NOTE! Do not damage or lose the shims!
884265
884386
15. Remove the collar washer (1) from the double
bearing box.
NOTE! Take care of the shims (2).
16. Remove the locking ring (1) and the sealing (2).
NOTE! Always replace the sealing!
17. Press out the input gear. Use special tools 884386
and 884259.
Repair instructions
884259
884386
33