Volvo Penta AQUAMATIC 280 Workshop Manual page 15

Special tools
884794
884799
884807
884932
884794-9 Puller, forward bearing race remover, low-
er
884795-6 Bearing install tool, lower
884796-4 Drift, bearing remover, lower
884797-2 Press tool, bearing & seal, lower
884798-0 Install tool, prop shaft bearing
884799-8 Installer, lower press fixture, lower
884801-2 Press tool, bearing & seal installer, lower
884802-0 Shaft puller, duoprop – lower
884803-8 Drift, tube gear bearing & seal remover –
lower unit
884806-1 Drift, tube gear bearing installer – lower
884807-9 Large protective sleeve/ring, black – low-
er
1)
884830-1 Socket – vertical shaft
1) Earlier part no. 884264
12
884795
884801
884830
884933
884796
884802
884831
884936
8 84831-9
Press fixture, bearing race remover, low-
er
884832-7 Drift set, tube gear race remover, lower
884874-9 Support, dismantling the sterndrive from
the transom shield
884932-5 Disassembly tool for the outer bearing
races of the double bearing box
884933-3 Assembly tool for the outer bearing races
of the double bearing box
884936-6 Yoke, holding the sterndrive while install-
ing the clamps for the bellows. Models
280 & 285
884938-2 Sleeve for the disassembling of gear
wheels in upper gear
884941-6 Attachment, duoprop prop shaft runout,
lower
884797
884803
884832
884938
884798
884806
884874
884941