Volvo Penta AQUAMATIC 280 Workshop Manual page 30

885143
11. Remove the cotter pin on the trim cylinder pin. Re-
move the trim cylinder pin. Raise the drive manually
and insert special tool 885143.
12. Using special tool 884573, disconnect the exhaust
bellows.
884573
885143
13. Remove the clamp on the raw water hose. Re-
move the raw water hose. Remove special tool
885143 and carefully lower the drive.
14. Remove the hook-up fork pin lock bolt. Using Pin
removal tool 885148, pull the pin half way out of the
transom shield.
WARNING! Do not remove the pins completely,
the sterndrive will fall off the boat.
Removing the sterndrive
27