Volvo Penta AQUAMATIC 280 Workshop Manual page 64

11. Coat the cover with sealant, Volvo Penta part no.
1141570-0 and install the sealing ring (1) so that the
sealing for the front, right hand screw ends up in the
recess of the cover, provided for it.
12. Insert the calculated shims and tighten the cover.
NOTE! The front, right hand screw is a hollow screw,
to be installed with an O-ring underneath the head of
the screw. Tighten the screws with a torque of
15 Nm (11.04 lb.ft.) in diagonal sequence.
Repair instructions
61