Technical data
Models SP-A, SP-A1, SP-A2 and SP-C
GeneralData
Type designation .....................................................................
Shift mechanism .....................................................................
Maximum Propeller diameter ...................................................
Maximum tilt angle, approx. ....................................................
Power Trim & tilting device .....................................................
Steering angle, max. ...............................................................
Overall gear ratio
Model SP-A ............................................................................
Model SP-A1 ...........................................................................
Model SP-A2 ...........................................................................
Model SP-C ............................................................................
Weight
Models SP ..............................................................................
Gear backlash
Upper gear, measured directly on the gear wheel,
ratio 1.61:1 ........................................................................
ratio 1.89:1 ........................................................................
ratio 2.15:1 ........................................................................
Lower gear, measured on the intermediate shaft spline joint ....
Lubrication System
Pump, type .............................................................................
Oil quality ................................................................................
Viscosity .................................................................................
Oil quantity, approx. ................................................................
Oil quantity, 1 in. extension, approx. ......................................
Oil quantity, 4" extension, approx. ..........................................
Oil quantity between min. & max. marks .................................
Power Trim, oil quality .............................................................
1)
Synthetic oil grade 75W90 corresponding to API GL5 requirements is recommended for commercial use.
172
Aquamatic SP-A, SP-A1, SP-A2 & SP-C
Self adjusting Silent Shaft type of cone clutch,
servo assisted disengagement.
16"
60"
"Power Trim"
30°
1.61:1, 1.89:1, 2.15:1
1.61:1, 1.89:1, 2.15:1
1.61:1, 1.89:1
1.61:1, 1.89:1, 2.15:1
58 kg (127.9 lb.)
0.15-0.25 mm (0.006-0.010")
0.08–0.18 mm (0.003–0.007")
0.08–0.18 mm (0.003–0.007")
0.06-0.10 = 0.15-0.25 mm gear backlash in the
gear (0.002-0.004 in)
Circulation pump for distribution of oil to all
lubricating points
API-GL5
1)
SAE 90 or 80W90
2.6 liters (2.75 US Qts.)
2.6 liters (2.75 US Qts.)
2.8 liters (3.0 US Qts.)
0.15 liters (0.16 US Ots.)
ATF oil