Removing Rear Wheel - BMW S 1000RR Owner's Manual

Position clip 6.
Install screws 2 on left and
right with appropriate torque.
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Insert wheel speed sensor in
bore and install screw 1.
Remove adhesive tape from
wheel rim.
Firmly pull the handbrake lever
until the pressure point is per-
ceptible, and repeat this opera-
tion several times.

Removing rear wheel

Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends the BMW Motorrad
rear wheel stand.
Installing the auxiliary stand on
the rear wheel ( 139).
Support the rear wheel, e.g.,
with a wooden block, so that
it cannot fall down after the
quick-release axle is removed.
Remove axle nut 1 with
washer.
Loosen lock nuts 3 on left and
right.
9
133
z