BMW S 1000RR Owner's Manual page 49

tion at the rear wheel (see the
chapter "Technology in detail").
When the motorcycle comes
to a stop, the selected riding
mode is activated after approx.
ten seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Brakes not engaged
Throttle turned all the way
back
Clutch disengaged
After the new riding mode is
activated, the selection menu
disappears.
The configured riding mode
with the corresponding adapta-
tions of the engine character-
istics, ABS and DTC is main-
tained, even after the ignition is
switched off.
Installing coding plug
ATTENTION
Installing the encoding plug.
Accident hazard. Expiry of oper-
ating license for public roads.
Do not use the encoding plug
on public roads.
Switch off ignition.
Removing driver's seat (
ATTENTION
Penetration of dirt and mois-
ture in the open connector.
Malfunctions
After removing the encoding
plug, refit the cover cap.
Open cable ties and remove
cover cap of the plug connec-
tion 1.
57).
To do so, press the locking
device 2 down and pull off the
cap by pulling it upwards.
Insert the coding plug.
Switch on ignition and secure
plug connection using a new
cable tie.
4
47
z