Helmet Holder - BMW S 1000RR Owner's Manual

Removing driver's seat
Press cover of driver's seat
above screws 1 forward some-
what and hold in place.
Remove screws.
Push the driver's seat forward,
lift it at the rear and remove it.
When doing so, make sure that
the paneling is not damaged by
the screws.
Lay the driver's seat on a clean
surface with the upholstered
side down.
Installing driver's seat
Mount driver's seat in mount 2,
then position over screw sock-
ets 3. When doing so, make
sure that the paneling is not
damaged by the screws.
Press cover of driver's seat
over screw sockets toward
front somewhat and hold in
place.
Install screws 1.

Helmet holder

Lock helmet on
motorcycle
Removing passenger seat
( 56).
Turn over passenger seat.
4
57
z