BMW S 1000RR Owner's Manual page 138

9
136
Make sure that wheel speed
sensor 9 is not damaged when
rolling in rear wheel.
z
Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 10
toward front.
Roll rear wheel as far forward
as possible and lay chain 7 on
sprocket.
Insert right side shim 6 in
swing arm with travel stop 12
pointing toward front.
Raise rear wheel and install
quick-release axle 5 through
shim in brake-caliper support
and rear wheel.
Ensure that quick-release axle
seats securely against travel
stop on adjustment plate.