Rear-Wheel Stand - BMW S 1000RR Owner's Manual

Rear-wheel stand

Installing the auxiliary
stand on the rear wheel
Use basic stand with part num-
ber (83 30 0 402 241) and the
mounting pieces (83 30 2 152
839).
Install the mounting pins (83
30 2 152 841) 1 on the left
and right into the rear wheel
swing arm, tightening to speci-
fied torque.
Swinging-arm adapter on
rear wheel swinging arm
15 lb/ft (20 Nm)
Turn in the bracket 2 with the
long sides facing the outside.
Adjust the mounting pieces 3
to the width of the pins
inserted into the rear wheel
swing arm.
Adjust the height of the aux-
iliary stand so that the rear
wheel is lifted slightly off the
ground.
9
139
z