BMW S 1000RR Owner's Manual page 101

Detach screws 8 with wash-
ers and remove license-plate
carrier. Guide cable through
opening 9 when doing so.
Installing passenger seat
( 56).
Install license-plate
carrier
Park motorcycle, ensuring that
support surface is firm and
level.
Removing passenger seat
( 56).
Position license-plate carrier
and guide cable through open-
ing 9.
Install screws 8 with washers.
Close plug connection so that
locking mechanism 2 engages
and secure on rear frame with
cable tie 1.
with anti-theft alarm system
OE
(DWA)
Slide connector of license-plate
carrier onto anti-theft alarm
system bracket so that lock-
ing mechanism 7 engages.
6
99
z