BMW S 1000RR Owner's Manual page 103

Undo the screw 2 and remove
the turn signal. Guide cable
through fairing side panel.
Protect connector on motorcy-
cle against contamination.
Mount fairing side panel in
mount 6 on engine spoiler.
Mount side panel in rubber
buffer at position 4.
Install screws 3 with washers.
Install screws 2.
Install screw 1.
Position the wind deflection
wing 2 ensuring that is on the
correct side.
The letters "R" for the right
side and "L" for the left side
are stamped on the surfaces of
the deflector panels.
Install screws 1.
6
101
z