BMW S 1000RR Owner's Manual page 65

Phase 1
The indicator and warning lamps
1 light up and the universal warn-
ing lamp 2 lights up in yellow.
The tachometer needle is run up
to the maximum engine speed.
All segments are shown in the
display.
Phase 2
The universal warning light
changes from yellow to red.
Phase 3
The tachometer needle drops
back to zero.
The indicator and warning lights
go out.
OA
with ABS Pro
ABS Pro
is displayed when
RAIN SPORT
the or
mode is set.
The display reverts to the stan-
dard format.
Should one of the warning lights
fail to appear:
WARNING
Defective warning lights.
Lack of display of malfunctions.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ABS self-diagnosis
The readiness for operation of
the BMW Motorrad Race ABS
is checked by the self-diagnosis.
riding
The self-diagnosis routine runs
automatically when you switch on
the ignition. To check the wheel
speed sensor, the motorcycle
must be driven a few yards.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ABS indicator light flashes.
Phase 2
Check wheel sensor while
starting off.
ABS indicator light flashes.
5
63
z