BMW S 1000RR Owner's Manual page 143

Remove spring wire brackets 4
from their detents on left and
right and swivel them up.
Remove bulb 5 from the
socket.
Replace defective bulb.
NOTICE
Light sources featuring spec-
ification ratings for higher lev-
els of illumination are commer-
cially available as special acces-
sories. These light sources have
a shorter service life than con-
ventional light sources and also
generate more heat. Under some
circumstances the high levels of
heat radiation can damage the
headlight assembly.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To avoid contamination on the
bulb's glass surface, never
touch or hold the bulb any-
where other than on its metal
socket base.
Install bulb 5. Start by inserting
the lug 6 then press the bulb
into the socket.
Insert both sides of wire
spring 4 into the retainer.
Attach plug 3.
9
141
z