BMW S 1000RR Owner's Manual page 55

Rebound stage, basic
setting, front
Position 7 (sporty setting with
driver 187 lbs (85 kg))
Make sure that the same val-
ues are set on the left and
right.
Factory settings at front
wheel
Use the following specification
data to adjust to factory set-
tings.
Factory settings for
jounce/rebound at front
Position 4
Adjusting compression
damping (jounce) at rear
wheel
Make sure ground is level and
firm and park motorcycle.
Adjust compression damping
extended jounce travel (low
speed) with adjusting screw 1
and compression damping for
short jounce travel (high speed)
with adjustment ring 2.
To increase damping: turn
adjusting screw or adjustment
ring with tool of onboard tool
kit so that marking 3 or 4
points to a higher figure on the
scale.
To decrease damping: turn
adjusting screw or adjustment
ring with tool of onboard tool
kit so that marking 3 or 4
points to a lower figure on the
scale.
4
53
z