Cables And Terminal Block - EverFocus EFN3320 Quick Installation Manual

2.

Cables and Terminal Block

This section describes the cables and terminal block of the fisheye cameras. The EFN3320 only
features a PoE cable.
For EFN3320c (Indoor)
The Cables provide connections for Network, power, audio input / output, alarm input / output and
video test output. Note that the audio line in/out cable features a 3.5mm TRS connector. Be sure to
prepare speakers / microphones with TRS connector (see TRS Connector image below). Also,
speakers / microphones with a (built-in) amplifier and external power supply are required.
TRS Connector
Ground (Sleeve)
Right Channel (Ring)
Left Channel (Tip)
For the Video Test-Out cable to work, the Stream 4 must be
disabled (unchecked), see Stream Settings in 7.2.1 Streaming
and Audio in the User's Manual.
LAN / PoE Cable
Alarm Input / Output
Audio Input (TRS Line-in)(Pink)
Audio Output (TRS Line-out)(Green)
Video Test-Out (BNC)
12 VDC Input
To activate the Audio function, the Enable Audio must be checked.
See Audio Settings in 7.2.1 Streaming and Audio in the User's
Manual.
4
EFN Series Fisheye IP Camera
Pin Assignment from Alarm I/O
Pin 1: Alarm In (+)
Pin 2: Alarm GND (-)
Pin 3: Alarm COM (-)
Pin 3: Alarm Out (+)
4 3 2 1