b. Loosen and remove the Cable Gland from the Camera Case. Screw the Cable Gland to the
hole on the bottom of the Camera Case.
Cable Gland
c. Screw the Circle Plate to the side hole on the camera Case.
d. Screw the Base Plate to the ceiling / wall / desk.
Base Plate
If you want to install the camera to a wiring box, you have to screw the Adapter Plate
between the Base Plate and the Wiring Box.
Base Plate
Adapter Plate
Camera Case
Wall
Wiring Box
13
EFN Series Fisheye IP Camera