Table of Contents
Advertisement
4. Screw the Camera Case back to the Base Plate.
Camera Case
5. Insert the PoE cable or the additional cables through the Cable Gland. Up to three cables can be
inserted. Note that except the PoE cable, additional wires have to be bundled into a cable with
diameter ranging from 5.3mm to 6.4mm (see Step d below).
Screw Cap
Cable Gland
a. Keep the supplied 6 Adjustment Rings for waterproofing.
•
Transparent x 5 (1 mm thickness)
b. Remove the Plug(s) from the Stopper (depends on the number of cables inserted). One
Cable Conduit can only be inserted with one cable.
Cable Conduit
Plug
Base Plate
Adjustment Ring(s)
Stopper
Stopper Claw
Screw Cap
Plug
Cable Gland
•
Black x 1 (0.5 mm thickness)
14
EFN Series Fisheye IP Camera
Stopper
Screw Body
Advertisement
Table of Contents
