Table of Contents
Advertisement
I/O Terminal Block
The I/O terminal block, located on the rear panel of the camera, can be used to develop application
for alarm in / out and RS-485 devices.
Pin Assignment
No. Function
1
2
1 2 3 4 5 6
Packing List
• EAN Series Camera (lens not included) x 1
• Software CD x 1
• Quick Installation Guide x 1
• Tool Packet x 1 (contains the following items)
-
C-Mount Lens Adapter
-
Hexagon Wrench
-
2 MAC Address Stickers
-
Two-Pin Terminal Block (24VAC~)
Note:
1.
Equipment configurations and supplied accessories vary by country. Please consult your local
EverFocus office or agents for more information. Please also keep the shipping carton for
possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
No. Function
Alarm COM (-)
3
Alarm Output (+)
4
Alarm Input (+)
Digital GND (-)
-
Video Test-Out Cable (BNC)
-
Power Pigtail Cable
-
¼-20 UNC Thread Mounting Bracket and 2
Screws
3
EAN7221/7260/7360
No. Function
5
RS-485+
6
RS-485-
Advertisement
Table of Contents
