Table of Contents
Advertisement
Note that the triangle mark on the rear side of the camera should point to the same direction
with the triangle mark on the Base Plate / Tilting Wall Mount Bracket.
Rear side of the camera
6. Connect the network or power cable to the camera. The installation is now complete.
3.3 Outdoor Type
The following instruction is an example of Wall Mount installation. You can apply this instruction to
Ceiling / Desk Mount as well.
Ceiling Mount
1. Unscrew the four screws and remove the cover from the camera.
Base Plate
Desk Mount
EFN Series Fisheye IP Camera
Tilting Wall Mount Bracket
Wall Mount
11
Advertisement
Table of Contents
