Table of Contents
Advertisement
Note:
1. You might be required to install some add-ons for viewing the camera feed. If asked,
click Run Add-on.
2. To enable Remove Live View, Firmware Upgrade and ActiveX Prompt on Internet
Explorer, some settings have to be complete. Please refer to 4.2 Settings for Microsoft
Internet Explorer in the User's Manual.
2. To optionally configure the Machine Name, IP Address, IP Type or Port Number using the IPU:
a. Log in the camera by checking the desired model and then click the Log in
b. Type the Username and Password. Click the OK button, the Login status displays.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will
be able to log in several cameras at once.
c. Right click the column to configure the settings. Click the Apply Changes
apply and save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your
network settings, please consult your network administrators for configuration details.
18
EFN Series Fisheye IP Camera
icon.
button to
Advertisement
Table of Contents
