Sp3-Xxx: Process - Ricoh B003 Service Manual

SP3-xxx: Process

SP3 Mode Number
3001* ID Sensor Initial Setting
* 1* ID Sensor PWM Setting
2* ID Sensor Initialization
3103* ID Sensor Output Display
1* Vsg (Drum Surface Output)
2* Vsp (Pattern Output)
3* Vpdp (Immediate Post-
Pattern Output).
4* Vsm/Vsg (Immediate
Grayscale Post-Pattern
Output)
SM
CÓPIA NÃO CONTROLADA
Function and [Setting]
Allows you to reset the PWM of the ID sensor
LED to avoid a service call error after clearing
NVRAM or replacing the NVRAM.
[0 ~ 255 / 100 / 1 step]
The PWM data is stored by executing SP-3001-2.
Performs the ID sensor initial setting. ID sensor
output for the bare drum (V
automatically to 4.0 ±0.2 V.
Press # to start. Perform this setting after
replacing or cleaning the ID sensor, replacing the
drum, or clearing NVRAM.
Displays the current V
grayscale control.
[0V ~ 5.00V]
If the ID sensor does not detect the ID pattern,
is displayed and an SC code is generated.
If the ID sensor does not detect the bare area of
the drum,
is displayed and an SC code is generated.
5-15
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
) is adjusted
SG
, V , V , and
SG SP SDP
V = 5.0 V/V = 5.0 V
SP SG
V = 0.0 V/V =0.0 V
SP SG
B003/B004/B006/B007