Development Unit And Pcu - Ricoh B003 Service Manual

MAIN MACHINE INSTALLATION

Development Unit and PCU

[A]
[D]
[E]
1. Open the front cover and remove the tape and retainers [A].
2. Loosen [B] (! x1) and rotate the bracket [C].
3. At [D]: Push down lever
push the development unit to the left
the drum.
4. Slowly slide out the PCU [E] and place it on a clean flat surface.
5. Remove the three clamps and wire [F].
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
[C]
B004I104.WMF
!
. Pull the PCU out a small distance
#
1-8
CÓPIA NÃO CONTROLADA
B004I511.WMF
so the development unit is away from
[B]
A284I500.WMF
[F]
"
, and then
SM