Inverter /Original Set Sensors - Ricoh B003 Service Manual

INVERTER /ORIGINAL SET SENSORS

1.8 INVERTER /ORIGINAL SET SENSORS
1. Rear cover. (☛ 1.1)
2. Lower the original stopper [A] by
rotating the pick-up motor.
3. Original feed unit.(☛ 1.2)
4. Feed guide plate [B] (! x5)
NOTE: Raise the original tray before
you re-install the paper feed guide.
5. Separation roller, torque limiter (# x1)
(☛ 1.7)
6. Bracket [C] (! x1, " x1)
7. Inverter sensor [D] (! x1)
8. Original set sensor [E] (" x1)
1.9 PICK-UP MOTOR/ORIGINAL STOPPER HP
SENSOR/PICK-UP HP SENSOR
1. Rear cover (☛ 1.1)
2. Pick-up motor [A] (" x1, ! x2, Timing
belt)
3. Sensor bracket [B] (" x2, ! x1)
4. Pick-up HP sensor [C]
5. Original stopper HP sensor [D]
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
[B]
8-6
CÓPIA NÃO CONTROLADA
[A]
[B]
[A]
[C]
[D]
[E]
B351R109.WMF
[C]
[D]
B351R114.WMF
SM