Finisher Main Board - Ricoh B003 Service Manual

FINISHER MAIN BOARD

1.15 FINISHER MAIN BOARD
1. Rear cover (☛ 1.1.1)
2. Main PCB [A] (! x 6, All #)
1.16 PUNCH HOLE POSITION ADJUSTMENT
To adjust the position of the punch holes in the paper feed direction, use the
appropriate SP mode.
To adjust the horizontal position of the holes, use the spacers provided with the
punch unit.
1. Rear cover (☛ 1.1.1)
2. Punch unit [A] (! x3, # x5)
3. Spacers [B]
The punch position can be
adjusted by up to 4 mm using
combinations of the 3 spacers
provided with the finisher.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
[A]
[B]
14-12
CÓPIA NÃO CONTROLADA
B352R206.WMF
[A]
B352R119.WMF
SM