Yamaha FJR1300AS(X) Service Manual page 676

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM (FJR1300AS
Diagnos-
tic code Item
No.
Sh_ _62 Malfunction history
code erasure
• No history
• History exists
Sh_ _63 Clutch actuation op-
eration
NOTE:
The checking meth-
od for the diagnostic
code (Sh_ _63) can-
not be performed
when any of the fol-
lowing fault codes
are detected.
Sh_ _11, Sh_ _12,
Sh_ _13, Sh_ _15,
Sh_ 16, Sh_ _17,
Sh_ _25, Sh_ _26,
Sh_ _36, Sh_ _37,
and Sh_ _44
Data displayed on
meter (reference
value)
Sh_ _62
01–09
• First displays Sh_
_62 for 6 seconds,
and then displays
the total number
of malfunctions,
including the cur-
rent malfunction,
that have oc-
curred since the
history was last
erased.
• If there are nine or
more of fault
codes stored in
the malfunction
history, "09" is dis-
played.
Sh_ _63
8-199
Checking method
—
• If fault codes are stored in the malfunc-
tion history, the hand shift select indicator
light will come on.
To erase the history, set the engine stop
switch from " " to "
After the history is erased, the hand shift
select indicator light will go off.
The clutch actuator can be operated in this
mode.
1. The hand shift select indicator light
comes on when the clutch is engaged.
2. Set the engine stop switch to "
push the hand shift select button simul-
taneously. The clutch will disengage
and the hand shift select indicator light
will go off.
3. Set the engine stop switch to "
push the hand shift select button simul-
taneously. The clutch will engage and
the hand shift select indicator light will
come on.
4. If the clutch actuator sensor is malfunc-
tioning, the hand shift select indicator
light will flash.
only)
".
" and
" and