Yamaha FJR1300AS(X) Service Manual page 526

5. Check the diode 2. (FJR1300AS
only)
Refer to "CHECKING THE DIODE
(FJR1300AS only)" on page 8-257.
OK ↓
6. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM (1/2)
(FJR1300A)" on page 8-39, "CIR-
CUIT DIAGRAM (2/2) (FJR1300A)"
on page 8-41, "CIRCUIT DIAGRAM
(1/2) (FJR1300AS)" on page 8-43,
and "CIRCUIT DIAGRAM (2/2)
(FJR1300AS)" on page 8-45.
OK ↓
This circuit is OK.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal light bulbs
and sockets.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-238.
OK ↓
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE TURN
SIGNAL/HAZARD RELAY" on page
8-245.
OK ↓
NG →
Replace the diode.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the turn signal light bulb, socket or
both.
NG →
Replace the left handlebar switch.
NG →
Replace the right handlebar switch.
NG →
Replace the turn signal/hazard relay.
8-49
SIGNALING SYSTEM