Yamaha FJR1300AS(X) Service Manual page 315

Pinch bolt (rear side)
24 Nm (2.4 m·kg, 17 ft·lb)
NOTE:
Tighten the pinch bolts (rear side) one at a time,
making sure to tighten the first bolt again after
tightening the second bolt.
11.Tighten:
• Engine mounting bolts (top) "15"
(temporarily tighten)
• Engine bracket bolts (top) "13"
(temporarily tighten)
NOTE:
When temporarily tightened, the bolts "15" and
"13" should be flat against the engine and frame
surface.
12.Tighten:
• Engine mounting bolts (top) "15"
• Engine bracket bolts (top) "13"
Engine mounting bolt (top)
37 Nm (3.7 m·kg, 27 ft·lb)
Engine bracket bolt (top)
16 Nm (1.6 m·kg, 11 ft·lb)
8
1
14
4
11
5
6
13.Install:
• Engine bracket (left rear side) "1"
• Engine bracket bolt (left rear side) "2"
• Engine mounting bolts (left rear side) "3"
NOTE:
Do not fully tighten the bolts.
14.Tighten:
• Engine bracket bolt (left rear side) "2"
15.Tighten:
• Engine mounting bolts (left rear side) "3"
10
9
16.Install:
• Brake pedal "1"
NOTE:
Align the punch mark "a" on the brake pedal with
the punch mark "b" on the brake pedal pivot
shaft.
5-10
ENGINE REMOVAL
13
13
15
15
13
13
Engine bracket bolt (left rear
side)
32 Nm (3.2 m·kg, 23 ft·lb)
Engine mounting bolt (left rear
side)
16 Nm (1.6 m·kg, 11 ft·lb)
1
3
Brake pedal pinch bolt
8 Nm (0.8 m·kg, 5.8 ft·lb)
2