Yamaha FJR1300AS(X) Service Manual page 436

NOTE:
• The bearing pin "1" must face towards the rear
of the upper crankcase.
• Make sure the bearing circlip "2" is inserted into
the groove in the upper crankcase.
1
2
5. Check:
• Transmission
Rough movement → Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
6. Install:
• Oil seal "1"
(to gear position sensor bracket)
Installed depth "a"
4.2–4.7 mm (0.17–0.19 in)
1
a
5-131
TRANSMISSION