Yamaha FJR1300AS(X) Service Manual page 411

EW3P61014
WARNING
If the bolt is tightened more than the speci-
fied angle, do not loosen the bolt and then re-
tighten it. Instead, replace the bolt with a new
one and perform the procedure again.
EC3P61033
CAUTION:
• Do not use a torque wrench to tighten the
bolt to the specified angle.
• Tighten the bolt until it is at the specified
angle.
NOTE:
On a hexagonal bolt, note that the angle from
one corner to another is 60°.
7 5
10
4
L LLL L LLL L L LLL L
8. Tighten:
• Crankcase bolts "11"–"31"
1 3
9
6
2
8
L LLL L L LLL L L LLL L
NOTE:
Tighten the crankcase bolts in the proper tight-
ening sequence as shown.
13 21
25
LLL
5-106
CRANKCASE
Crankcase bolt "11", "12"
24 Nm (2.4 m·kg, 17 ft·lb)
Crankcase bolt "13", "14"
12 Nm (1.2 m·kg, 8.7 ft·lb)
Crankcase bolt "15"–"31"
10 Nm (1.0 m·kg, 7.2 ft·lb)
17
16
18 15
23
11
12
27
31
28
26
20
19 22
14
24
29
30