Yamaha FJR1300AS(X) Service Manual page 488

8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
9. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
10.Check the gear position switch.
(FJR1300A)
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
11.Check the neutral switch.
(FJR1300AS)
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
12.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-233.
OK ↓
13.Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-246.
OK ↓
14.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-248.
OK ↓
15.Check the entire ignition system
wiring.
Refer to "CIRCUIT DIAGRAM (1/2)
(FJR1300A)" on page 8-1, "CIR-
CUIT DIAGRAM (2/2) (FJR1300A)"
on page 8-3, "CIRCUIT DIAGRAM
(1/2) (FJR1300AS)" on page 8-5,
and "CIRCUIT DIAGRAM (2/2)
(FJR1300AS)" on page 8-7.
OK ↓
Replace the ECU.
NG →
Replace the main switch/immobilizer unit.
NG →
Replace the right handlebar switch.
NG →
Replace the gear position switch.
NG →
Replace the neutral switch.
NG →
Replace the sidestand switch.
NG →
Replace the relay unit.
NG →
Replace the lean angle sensor.
NG →
Properly connect or repair the ignition sys-
tem wiring.
8-11
IGNITION SYSTEM