Selecting A Paper Setting - Konica Minolta BIZHUB C203 User Manual

Copy Operations
3.7
bizhub C353/C253/C203 (FE2)
Downloaded From ManualsPrinter.com Manuals

Selecting a Paper Setting

The paper size can be selected automatically according to the original size or it can be specified manually.
Specify the paper size according to the corresponding procedure, depending on the desired copy settings.
As the factory default, "Auto" is selected.
Reminder
When copying after selecting a paper tray with letterhead paper selected as the paper type, the copy
speed will be slow, even with single-sided copying, since the paper alignment operation is performed.
Note
If a setting for special paper is selected for a paper tray, that tray is not selected automatically with the
"Auto" Paper setting. (However, a paper tray set to "Single Side Only" is given priority to be selected
with single-sided printing.) Be sure to specify a paper setting when special paper is loaded into a paper
tray. For details, refer to "Specifying a setting for special paper" on page 3-106.
If the "Auto Paper Select" was selected at the "Auto Zoom" setting, the Zoom screen appears. Touch
the button for the desired zoom ratio.
The "Auto" Paper setting cannot be combined with the "Auto" Zoom Setting.
3
3-39