Konica Minolta SL1000 User Manual page 84

SL1000 User's Guide
Toolbar (SCAN Mode)
1. Non-display button
2. Toolbar
3. Add
4. Remove
5. Move Up
6. Move Down
7. Reset
3-56
8
9
10
11
The buttons not displayed on the toolbar is displayed in the list.
The button displayed on the toolbar is displayed in the list.
The list is displayed, queuing up in order from the left of the toolbar to
the lower right.
The button displayed on the toolbar is added.
"Non-display button" is selected, and "Add" is clicked, and the
oriented button is added onto the "Toolbar" list.
The button displayed on the toolbar is deleted.
The oriented button on the "Toolbar" is selected, and the button is
deleted when "Remove" is clicked.
The position of the selection button on the toolbar is moved (on the
left).
When the button is selected on the "Toolbar", and "Move Up" is
clicked, it shifts up one.
The position of the selection button in the toolbar is moved on (lower
right).
When the button is selected on the "Toolbar", and "Move Down" is
clicked, it shifts down by one.
The button displayed in the toolbar is reset in the initial values.
1
3
4
7
2
5
6
12