Konica Minolta SL1000 User Manual page 68

SL1000 User's Guide
1. Save In
3-40
It selects the repository for each batch scanned file.
The scanned file is saved to each batch folder.
When the "Save In" repository is not designated, a folder for each
custom profile registered in the SL-Touch folder is created, and the
folder of each batch is created under that name. ･･･ Reference to figure
below
As for the Default batch folder, preservation place cannot change.
Custom
Batch profile
Folder registered
SL-Touch Default
Profile A
Profile B
When the "Batch Folder" is default, it becomes

NOTE !
"SL-Touch" Folder under "My Pictures folder of the
logon user of Windows".
And, Batch Folder is able to change in Preferences.
 3.8
Preferences
When repository location has not been selected, "Save

In" is displayed by the blank.

When you set the preservation place, save the batch
after that.
If the batch is not saved, the preservation place will not
be changed.

When the file is stored in a folder before the folder is
changed, all files except the subordinate position folder
are copied onto the new selection folder.

When the image file exists in the folder that preserves
the rewrite, the file is not registered as an image in the
batch. Only the file newly scanned is registered in the
batch.
Each Batch
folder
folder
Default
Batch 1
Default
Batch 1
Default
Batch 1
Change
Repository
Impossible
Possible
Impossible
Possible
Impossible
Possible