SL1000 User's Guide
9
The language selection screen will be displayed, then, select the language and click the
"OK" button.
The selected language can be changed in the "Preferences".
NOTE !
When the "InstallShield Wizard Complete" screen appears, click the "Finish" button and
10
remove the CD-ROM from the Personal Computer.
IMPORTANT !
11
Connect the Scanner to the Personal Computer with the USB cable.
12
Turn the Power Switch of the Scanner ON.
3-8
Execute the installation of the device driver when the installation of
SL-Touch for SL1000 application is completed.
If the installation of the device driver is not completed, the application
cannot be started.
Install the device driver according to the following procedures.