Konica Minolta SL1000 User Manual page 139

Error message
SL-Touch Error
CCD Board Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
Zoom Motor Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
Focus Motor Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
H/W Error.
Turn OFF the power switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
Invalid Shading data.
The "Shading" adjustment must be
completed.
SL-Touch Error
Failed to read the Shading Data.
The "Shading" adjustment must be
completed.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
・ It is necessary to adjust the Scanner.
・Please contact the Authorized Dealer for Service,
and explain the detail of the error and condition.
・It is necessary to adjust the Scanner
・Please contact the Authorized Dealer for Service,
and explain the detail of the error and condition.
Chapter 5 Troubleshooting
Action
5-5