Konica Minolta SL1000 User Manual page 79

2. Magnifier + button
3. Magnification
4. Magnification (Zoom
Window)
5. Show Preview
Image
6. Full Screen
7. Show Property
8. Show Preferences
Button
The function when "Magnifier" button was pressed is selected.
Normal:
The magnification is executed in a normal step.
Specified Magnification:
The magnification is executed to the specified magnification by the
operation once.
When "Specified Magnification" was selected, and the

NOTE !
screen magnification was exceeded a specified
magnification, the magnification is executed in a usual
step.

As for this setting, only SCAN Mode is effective. It
magnifies for VIEW Mode in a usual step regardless of
the above-mentioned setting.
When "Specified Magnification" was selected, the magnification ratio
is set.
The ratio of magnification when "Zoom Window" was displayed is set.
The return time until normal display can be set when the preview
screen has been displayed by pressing "Preview" button.
It can be selected according to 4 selections.
(10sec, 20sec, 30sec and Unlimited).
Change to the "Full Screen Mode" that doesn't display Windows
Taskbar.
In case of "Full Screen Mode", the application is able

NOTE !
to quit by "Shutdown Screen" or "Alt + F4 of the
keyboard".
 2.2
Application Shutdown
Various properties are displayed at the right of the scan window by the
sidebar.
SCAN Mode
The "Preferences" button on Toolbar is displayed.

The Preferences screen can be displayed via "Ctrl" +
NOTE !
"K" on the Keyboard (The password is also required).
Chapter 3 SL-Touch for SL1000
VIEW Mode
3-51