Konica Minolta SL1000 User Manual page 66

SL1000 User's Guide
9. Image Type
10. Edit
11. Watermark
12. Watermark Setting
13. Periodical Scan
3-38
The mode of the output image (Color and Binary) is set.
When Film "Color Film" is selected:
Only the Color (24bit) can be selected.
When film "Monochrome Film" is selected:
It can be selected according to 4 selections (Gray Scale (8bit),
B/W (Manual), B/W (Auto), B/W (Error Diffusion)).
"Masking", "Centering" and "Auto Fit" are set.
1. Masking: When a size that is larger than the image that has
been selected, the outside of the image is deleted by
"White".
2. Centering: The center gap of the image is detected, and the
image is arranged at the center of the output area.
3. Auto Fit: The image is enlarged to fit the paper size and output.
When "Custom" paper size is selected, only the
image is output.
The "Edit" might not function correctly according to shape and

NOTE !
the density of the image.

When the "Custom Mode" has been selected by "Cropping
Mode", the setting of "Edit" becomes invalid.
Watermark is overlaid to the scan image, and it outputs.

When OCR was executed because Watermark is overlaid as
NOTE !
an image, the overlay part might not be recognized.
The character, the size, and the position etc. of Watermark are set.
 3.7
Watermark
The scan and the file preservation are repeated periodically under the
specified time.
The scan interval can be set within the range of 3-10 seconds.
Periodical Scanning will start when "Scan to File" is clicked, and
terminates if "STOP" button is clicked.
Periodical Scan doesn't function when the "Scan to Print" is

NOTE !
selected.

When the film movement has not been detected even if the
beginning period of Periodical Scan passes, Periodical Scan is
discontinued.
In that case, "Scan to File" is clicked again, and Periodical Scan
is executed.