Konica Minolta SL1000 User Manual page 81

Other
1. OCR Language
2. E-Mail Setting
3. Put the Scanner to
Sleep
4. Turn OFF the
Scanner
5. Change Password
6. Maintenance Mode
7. OK
8. Cancel
5
The default OCR language is selected.
The OCR language can be selected from the following 7 settings.
English, Croatian, Dutch, French, German, Italian, Portuguese,
Russian and Spanish
Settings related to E-mail transmissions are available.
 3.11
E-Mail Setting
The time that should elapse when no operation is performed before the
device enters Sleep Mode.
It can be selected according to 7 selections (5 Minutes, 15 Minutes, 30
Minutes, 60 Minutes, 2 Hours, 3 Hours and 4 Hours).
The time that should elapse when no operation is performed in Sleep
Mode before the Power Supply is turned OFF.
It can be selected according to 4 selections (60 Minutes, 2 Hours, 3
Hours and 4 Hours).
When the screen of "Preference" is accessed, the password is changed.
 3.10
Password Change
The device is adjusted in this area.
Only Service Technicians can use this mode.
The setting is saved, and exits out of the screen.
The setting is canceled, and exits out of the screen.
Chapter 3 SL-Touch for SL1000
1
2
3
4
6
7 8
3-53