Konica Minolta SL1000 User Manual page 70

SL1000 User's Guide
Print
1. Printer Name
2. Printer Name
3. Specify when
printing
4. Fit to printable area
of paper size
5. Rotate to
orientation of paper
6. Choose paper
source by scan
size
3-42
1
2
3
4
5
6
The output printer is selected.
The output printer is selected.
The printer setting screen in the figure below is displayed when the print
was executed by "Scan to Print" etc., and the print setting is enabled
before it outputs.
When the image is output, the image is magnified or reduced based on
the size of the paper.
The image rotates and is printed according to the orientation of the
paper.
When the selected scan size and the same print size and paper exist in
the printer output environment, the same paper as the scan size prints
automatically.