Konica Minolta SL1000 User Manual page 54

SL1000 User's Guide
6. Film Color
7. Horizontal Flip
8. Rotate
9. OK
10. Cancel
3-26
The color of the film used is selected.
Monochrome Film:
Color Film:
Images are flipped to the right and left.
 When the Roll Film is selected, the initial value of
NOTE !
"Horizontal Flip" is "ON"
The image rotation is selected.
You can select four rotation values (None, CW90°, CCW180° and
CCW90°).
The display colors and the zoom position are determined in accordance with
the selected setting.

The following settings change into an initial value or the
NOTE !
registration value if the film selection is executed.
 Film Type
 Film Color (Monochrome and Color Film)
 Film Polarity (Positive and Negative Film)
 Zoom Position
 Horizontal Flip (ON and OFF)
 Rotate (None, CW 90°, CCW180° and CCW 90°)
 Cropping Mode
 Image Adjustment
It terminates the "Film Selection" without reflecting any settings.

When the application starts, the display colors and the
NOTE !
zoom position are determined by the setting in the
"Application Startup Setting" of the "Preferences".
The film is selected when the monochrome display
and scanning.
The film is selected when the color display and
scanning.