Color Temperature - Sony PDW-850 Operation Manual

The messages that give details of the settings and
adjustment progress and results can also be made
to appear for about three seconds while settings
are being changed, during adjustment, and after
adjustment.
For details about the display item selection, see
"Selecting the display items" (page 192).
For details about setting change and adjustment
progress messages, see "Change confirmation/
adjustment progress messages" (page 193).
For details about marker display, see "Setting the
marker display" (page 194).
All items that can be displayed on the viewfinder
screen are shown below.
Top of viewfinder screen
ab c d e
E X Z 99
H D 4 2 2 5 0 E 0 0 0 1 : 0 0 1 / 0 0 4 D C I N
13.9 K +
C O N T
F A N
L E V E L T O O H I G H
R E C 2 T C G
5600
1 W:A 18 dB 1/ 2000
ij
a Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 0.0 K to 99.9 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the OFFSET WHT setting (see
page 207).
No display: OFFSET WHT is OFF
+: The value of OFFSET WHT is greater than
3200K.
–: The value of OFFSET WHT is less than
3200K.
b Video format
Indicates the format of video being currently
played back or recorded (see page 51).
c Extender
Displays the extender settings of this unit and the
lens.
EX: The lens extender is on.
08: The lens shrinker is on.
x2D: The unit's digital extender is x2.
28
Locations and Functions of Parts and Controls
f g h
W 1 2 13.4V
35-30
W H I T E : N G
E X T
0 1 : 2 3 : 4 5 : 1 5 H D S D I
L O W L I G H T
1 35 30 - 125C F1.7
2
Ex2D: The lens extender is on, and the unit's
digital extender is x2.
x3D: The unit's digital extender is x3.
Ex3D: The lens extender is on, and the unit's
digital extender is x3.
x4D: The unit's digital extender is x4.
Ex4D: The lens extender is on, and the unit's
digital extender is x4.
d Zoom position
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
e Clip information
During shooting, displays information about the
clip being recorded or the clip to be recorded next.
During playback, displays information about the
playback clip.
The information that appears depends on the
setting of DISP CLIP NAME on the VF DISP 3
page of the OPERATION menu. You can also set
DISP CLIP NO(PB) on the VF DISP 2 page of the
OPERATION menu to "ON" to display the clip
number and total number of clips during
playback.
When DISP CLIP NAME is set to "PLAN":
During shooting, when Planning Clip Name
Display in the Disc Menu is set to "Enable",
this area displays the title specified in the
k
currently loaded planning metadata. (The
display format follows the setting of
"Planning Clip Name in Clip Info. Area" in
the Disc Menu.)
When DISP CLIP NAME is set to "AUTO":
During shooting, this area displays one of the
following, depending on the setting of
AUTO NAMING on the FILE NAMING
page of the OPERATION menu.
• "C****" or "TITLE": The clip name
(standard name, user-specified name, or
title) specified by "Display Title" in the
Disc Menu
• "PLAN": During shooting, when Planning
Clip Name Display in the Disc Menu is set
to "Enable", the title specified in the
currently loaded planning metadata. (The
display format follows the setting of
"Planning Clip Name in Clip Info. Area" in
the Disc Menu.)
During playback, this area displays the clip
name (standard name, user-specified name,
or title) specified by "Display Title" in the
Disc Menu.