Electric Color Temperature Filter - Sony PXW-X320 Operating Instructions Manual

k USB media icon indicator (see page 183)
or status indicator of the CBK-WA101
Wireless Adapter (not supplied) [M]
Indicator Meaning
Wi-Fi signal strength when
operating in station mode (1 to 4)
3G/4G/LTE USB modem RF
connection
Wired LAN connection
l Electric color temperature filter
Appears when the CC 5600K function is set to on.
m Filter indicator [M]
Indicates the currently selected ND filter position
number (see page 12).
When Electrical CC is assigned to an assignable
switch, the electrical filter position (A/B/C/D)
appears to the right of the ND filter position (1 to
4).
n White balance memory [M]
Indicates the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:P: Preset mode
3200: When the assignable switch to which Color
Temp SW 3200K has been assigned is on
4300: When the assignable switch to which Color
Temp SW 4300K has been assigned is on
5600: When the assignable switch to which Color
Temp SW 5600K has been assigned is on
6300: When the assignable switch to which Color
Temp SW 6300K has been assigned is on
o Gain value [M]
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
p Recording status indicator
When "OPERATION" > "Super Impose" >
"Super (Rec Status Indicator)" is set to "On" in
the setup menu, B marks are displayed as the
recording proceeds.
q Shutter [M] [D]
Indicates the shutter speed or the shutter mode.
For details, see "Setting the Electronic Shutter"
(page 53).
r Audio level meters [M]
Indicate the audio levels of channel 1 and channel
2.
s Remaining media capacity [M]
Indicates the recording time remaining for each of
the media loaded in the slots. The available time
for recording with the current video format
(recording bit rate) is calculated according to the
remaining space of each media and indicated in
time units of minutes. A lock icon appears if the
media is write-protected.
For details, see "Checking the Remaining Recording
Time" (page 64).
t Histogram [M] [A]
Shows a pixel distribution of video luminance
(HD mode only).
u Flashband reduce status indicator [M]
Appears when "Flashband Reduce" (see
page 131) of the OPERATION menu is set to
"On" and the flashband reduce function is
activated.
v Iris position indicator (when the lens is
mounted) [M]
Indicates the iris position and the setting for iris
override (reference value for the lens iris) (see
page 55).
The iris override setting is indicated by four
segments indicator as follows.
Reference Indicator
value
+0.25
x
x
+0.5
x
x
+0.75
xx
+1 xx
xx
–0.25
s
s
–0.5
s
–0.75 s
ss
28
Lower left segment is lit
gray.
Left two segments are lit
gray.
Left two segments and lower
right segment are lit gray.
All segments are lit gray.
Lower left segment is lit
white.
Left two segments are lit
white.
Left two segments and lower
right segment are lit white.